Loading…
Cloudy aquarium water is a common problem, especially in newly established tanks.
The colour and timing of the cloudiness can help identify the cause. In many cases, cloudy water is linked to suspended debris, bacterial growth, algae, overfeeding or poor water quality.
The correct treatment depends on the cause, so avoid adding random chemicals before checking the aquarium.
Before trying to clear the water, test:
In an established aquarium:
Cloudy water may look unattractive, but ammonia or nitrite is the more urgent concern.
Cloudy aquarium water may appear:
Each type may have a different cause.
White or milky water is often caused by a bacterial bloom or fine particles floating in the aquarium.
A bacterial bloom occurs when large numbers of free-floating bacteria multiply in the water.
It is common in:
The bacteria may be feeding on excess waste in the aquarium.
The cloudiness itself is not always directly harmful, but the conditions causing it may be dangerous.
A bacterial bloom may occur alongside:
Test the water and observe the fish carefully.
Fish gasping at the surface or breathing heavily may indicate low oxygen or poor water quality.
You should:
Do not repeatedly perform complete water changes or replace all filter media, as this may further disturb the aquarium cycle.
New gravel, sand or substrate can release dust into the water.
This often happens when:
The water may appear grey, white or dusty.
A fine filter pad or filter wool may help capture the particles.
Avoid disturbing the substrate while the filter removes the debris.
Green water is usually caused by free-floating algae.
The aquarium may look like it contains green fog, even when the glass itself is clean.
Common causes include:
Green water is more common when there is a combination of excess light and nutrients.
Try the following:
For many aquariums, approximately 6–8 hours of lighting per day may be a reasonable starting point, although planted aquariums may require adjustment.
A timer can help maintain a consistent schedule.
A temporary blackout may help in some cases, but it should be done carefully.
During a blackout:
A blackout may reduce algae, but the underlying cause must still be corrected.
A correctly sized UV steriliser may help control free-floating algae and clear green water.
However, it does not correct:
UV equipment should be selected and installed correctly.
Brown or yellow water may come from driftwood, decaying material or excess organic waste.
Some types of natural driftwood release tannins into the water.
Tannins may turn the water:
This is not necessarily harmful.
Some fish from soft-water environments may naturally benefit from tannin-stained water.
If you prefer clearer water, you can:
Do not boil or treat driftwood unless the material is suitable for that method.
Brown or yellow water may also be caused by:
Remove decaying material and test the water immediately.
Cloudiness after maintenance may be caused by:
Tiny air bubbles may make the water look temporarily white.
They often disappear naturally within a short time.
If the cloudiness continues, test the water and check the filter.
A new aquarium may become cloudy during the cycling process.
This can happen because the aquarium’s bacteria are still developing.
During this period:
A new aquarium may take time to establish a stable nitrogen cycle.
Clear water does not mean the aquarium is fully cycled.
Adding several fish at once increases the amount of waste entering the aquarium.
The biological filter may not immediately be able to process the additional ammonia.
This can cause:
Test the water and stop adding livestock until the aquarium is stable.
A filter may not clear the water when:
Check the filter flow and inspect it for blockages.
Gently rinse dirty media in removed aquarium water when necessary.
Do not wash all biological filter media under untreated tap water.
Usually, no.
Replacing all media at once can remove a large amount of beneficial bacteria.
This may cause:
Replace media gradually and only when needed.
Biological media can often be gently rinsed and reused for a long time.
Yes.
Uneaten food breaks down and adds organic waste to the aquarium.
Overfeeding may cause:
Feed only what the fish can consume within approximately one to two minutes.
Remove uneaten food when possible.
An overstocked aquarium produces more waste than the filter may be able to process.
Possible signs include:
A stronger filter may help with water quality, but it does not create more swimming space or territory.
Water clarifiers can bind tiny particles together so the filter can capture them.
They may help with suspended debris, but they do not fix:
Do not continue adding clarifier without identifying the cause.
Some products may not be suitable for every fish, shrimp, plant or marine aquarium.
Follow the directions carefully.
A complete water change is usually unnecessary and may create additional stress.
It can cause sudden changes in:
A suitable partial water change is generally safer.
Complete water replacement may be required in specific emergencies, but seek advice first where possible.
Act promptly when cloudy water is accompanied by:
Increase oxygenation, test the water and contact Roxy Aquarium as soon as possible.
When your aquarium becomes cloudy:
Contact or visit Roxy Aquarium and provide:
The colour of the water and the timing of the problem can help our team identify the likely cause.
Submit a support ticket and we'll get back to you.