Loading…
A new aquarium is not ready for fish simply because it has been filled with water and the filter is running.
Before an aquarium can safely support livestock, it needs time to develop beneficial bacteria that process toxic fish waste. This process is called the nitrogen cycle or aquarium cycling.
Cycling the aquarium correctly helps prevent ammonia poisoning, fish loss and ongoing water-quality problems.
Fish waste, uneaten food and decaying organic material produce ammonia.
Ammonia is highly toxic to fish.
During the nitrogen cycle:
Both ammonia and nitrite are dangerous and should be 0 ppm in a properly cycled aquarium.
An aquarium is considered cycled when its beneficial bacteria can process the waste produced by the aquarium’s livestock.
A cycled aquarium should normally show:
The presence of nitrate may indicate that ammonia and nitrite are being converted successfully.
However, test results should be monitored over time rather than relying on a single reading.
Beneficial bacteria live mainly on surfaces, including:
They do not live mainly in the aquarium water.
This is why replacing all filter media or heavily cleaning every surface can damage the biological cycle.
Cycling often takes several weeks, but there is no exact timeframe for every aquarium.
The process may be affected by:
Do not assume the aquarium is ready because a certain number of days has passed.
Testing is the only reliable way to understand the cycle’s progress.
Fishless cycling allows beneficial bacteria to develop before livestock is added.
This avoids deliberately exposing fish to toxic ammonia and nitrite.
During fishless cycling, a controlled ammonia source is introduced to feed the developing bacteria.
Speak with Roxy Aquarium before adding an ammonia source, as incorrect dosing can delay the process or create unsafe conditions.
A general fishless cycling process involves:
The correct method depends on the aquarium type and products being used.
Before starting, install:
Make sure all equipment is suitable for the aquarium size.
The filter should operate continuously throughout the cycling process.
Tap water may contain chlorine or chloramine.
These substances can harm fish and damage beneficial bacteria.
Treat all tap water with a suitable aquarium water conditioner before adding it to the aquarium.
Follow the product instructions carefully.
Do not assume that leaving water standing overnight will remove chloramine.
Beneficial bacteria need:
The filter should normally run 24 hours a day.
Switching the filter off for long periods may reduce oxygen and damage the bacterial colony.
During a power outage, restore filtration and oxygenation as soon as possible.
For tropical aquariums, the heater should usually be operating during cycling.
A stable, suitable temperature helps the bacterial process and ensures the aquarium is ready for tropical fish.
Do not raise the temperature excessively in an attempt to cycle faster.
The final temperature should suit the livestock you plan to keep.
During cycling, test:
Record the results so you can see how the cycle changes.
A typical pattern may be:
The timing and readings will vary.
At first, ammonia may remain present because there are not enough bacteria to process it.
As the first bacterial colony develops, ammonia should begin converting into nitrite.
Do not add fish while ammonia is present.
Nitrite often rises after the ammonia-processing bacteria become active.
This stage can sometimes last longer than expected.
Nitrite is highly toxic to fish and should be 0 ppm before normal stocking begins.
Continue testing and allow the bacteria time to develop.
Nitrate is the final product of the nitrogen cycle.
Its appearance can indicate that ammonia and nitrite are being processed.
Nitrate is less immediately toxic than ammonia and nitrite, but high levels can still cause stress and health problems.
Before adding livestock, an appropriate partial water change may be needed to reduce nitrate.
The aquarium may be ready when:
Do not rely only on clear water, bacterial products or the aquarium’s age.
Speak with our team when you are unsure how to interpret the results.
Bacterial starter products may help establish the biological filter, but results vary depending on:
Some products may support faster establishment, but they do not remove the need for water testing.
Do not assume the aquarium is fully cycled immediately after adding bottled bacteria.
Mature biological filter media from a healthy, established aquarium may significantly speed up cycling.
It can introduce an existing colony of beneficial bacteria.
Only use media from an aquarium that is:
Keep established media wet and oxygenated during transfer.
Allowing it to dry may kill much of the bacteria.
Old aquarium water contains relatively little beneficial bacteria compared with established filter media and aquarium surfaces.
Adding old water alone generally does not cycle a new aquarium.
Established filter media is usually much more useful.
Cycling with fish exposes them to possible ammonia and nitrite.
This can cause:
Fishless cycling is generally safer.
When fish are already present in an uncycled aquarium, careful testing and immediate water-quality management are required.
When fish are already present:
The priority is keeping ammonia and nitrite as close to 0 ppm as possible while the filter develops.
Excess food breaks down and creates more ammonia.
When fish are present, feed only a very small amount and remove uneaten food.
During fishless cycling, use only the planned ammonia source.
Adding random amounts of fish food can make the process difficult to control.
Excessively high ammonia may inhibit or delay beneficial bacteria.
More ammonia does not necessarily make the aquarium cycle faster.
Use a measured and controlled method.
Speak with our team before dosing pure ammonia or unfamiliar products.
Beneficial bacteria can become less active when pH falls too low.
The cycling process may also gradually reduce alkalinity in some aquariums.
Test pH regularly, especially when the cycle appears to have stalled.
Do not make sudden pH adjustments without understanding the aquarium’s hardness and buffering capacity.
A complete water change is not normally required during cycling unless there is a specific problem.
Water changes may be needed when:
Use conditioned, temperature-matched water.
Beneficial bacteria are developing inside the filter.
Replacing all media may restart or delay the cycling process.
During cycling:
Some disposable chemical media may follow different replacement instructions.
Avoid deep-cleaning the filter, substrate and decorations at the same time.
The developing bacteria need stable surfaces.
Remove obvious waste, but do not repeatedly sterilise the aquarium.
A cycle may appear to stop because of:
Review the test method and aquarium conditions before adding more products.
White or milky water is common in new aquariums.
It may be caused by a bacterial bloom or suspended particles.
Test ammonia and nitrite rather than judging the aquarium by appearance.
Avoid repeatedly changing all the water or replacing filter media simply because the water is cloudy.
Many live plants can be added while the aquarium is cycling.
Plants may absorb some nitrogen compounds and provide additional surfaces for bacteria.
However, plants do not guarantee that the aquarium is fully cycled.
Continue testing ammonia and nitrite.
Remove any dying leaves or decaying plant material.
Add fish only after testing confirms the aquarium is ready.
When you begin stocking:
Do not fully stock the aquarium in one day.
The beneficial bacteria adjust to the amount of waste being produced.
Adding many fish at once may create more ammonia than the filter can process.
After each addition:
Sensitive fish, shrimp, discus, marine species and specialist livestock should not be used to establish a new biological cycle.
Their aquarium should be stable before they are introduced.
Marine aquariums also require a nitrogen cycle.
The process should be completed before adding fish, corals or sensitive invertebrates.
Marine cycling may involve:
Ammonia and nitrite should be 0 ppm before normal stocking begins.
Marine aquariums should be stocked especially slowly.
Shrimp require stable water and may be sensitive to ammonia, nitrite, copper and rapid parameter changes.
A shrimp aquarium should be fully cycled and preferably mature before shrimp are added.
Biofilm and natural microorganisms also need time to develop.
Goldfish produce a large amount of waste.
Their aquarium requires:
Do not use goldfish to cycle a new aquarium.
Before adding fish, confirm:
Contact or visit Roxy Aquarium and provide:
Our team can help explain your test results and recommend the safest next step.
Submit a support ticket and we'll get back to you.